Wika 55 User Manual download pdf (Page 6)

11583747.03 10/2013 GB/D/F/E

6 WIKA operating instructions models 53, 54, 55 (ATEX)

2. Safety

WARNING!

Before installation, commissioning and operation, ensure

that the appropriate bimetal thermometer has been

selected in terms of measuring range, design and specic

measuring conditions. The compatibility of the wetted

parts of the process connection (thermowell, thermowell

stem) with the medium must be tested.

Non-observance can result in serious injury and/or

damage to equipment.

Further important safety instructions can be found in the

individual chapters of these operating instructions.

2.1 Intended use

These bimetal thermometers are used for measuring temperature in

hazardous areas of industrial applications.

The instrument has been designed and built solely for the intended

use described here, and may only be used accordingly.

The technical specications contained in these operating instructions

must be observed. Improper handling or operation of the instrument

outside of its technical specications requires the instrument to be

taken out of service immediately and inspected by an authorised

WIKA service engineer.

The manufacturer shall not be liable for claims of any type based on

operation contrary to the intended use.

2. Safety

1 2 3 4 5 6 7 8 9 10 11 ... 63 64

No comments

Wika 55 User Manual Page 6