Wika CTH6300 User Manual download pdf (Page 31)

31WIKA operating instructions, models CTH6300 and CTH6500

2079988.04 07/2014 GB/D

6. Commissioning, operation

6.4.7 Storage management [Lo6] (not possible with CTH6300)

Press the ENTER/MENU key and select Lo 6 using the arrow keys ▲▼ (only if a logging

device is ordered). Then press ENTER/MENU again. OFF appears in the lower display

line. Use the arrow keys ▲▼ to start the logger mode by means of ON now. Conrm

selection by pressing ENTER/MENU.

Use the arrow keys ▲▼ to choose between the automatic Auto or manual SPot saving

and conrm by pressing ENTER/MENU. Decide whether to add or create a new log le

by selecting Add and nLo6. When selecting the automatic saving at the end you are

asked to select the measuring interval:

1S = 1 second 1M = 1 minute

5S = 5 seconds 2M = 2 minutes

10S = 10 seconds 5M = 5 minutes

20S = 20 seconds 10M = 10 minutes

30S = 30 seconds 20M = 20 minutes

Conrm the input by pressing ENTER/MENU. Use ESC to return to the measuring

mode. Manual saving by means of SPot. Press ESC to save individual measured values

manually.

6.5 Storage query [HOLD-MAX-MIN-AVE]

After pressing the HOLD-MAX-MIN-AVE key for the rst time, the current measured

values at the moment of actuation are “frozen” and indicated on the display as Hold

values. Press this key repeatedly to request saved maximum, minimum and average

values in the lower line (small display).

Note for 2-channel instruments:

After displaying the hold values for both channels (large and small

display), the MAX-MIN-AVE values of the rst channel are displayed in

the lower line (small display), after that the values of the second channel

are displayed. If only one probe is connected to a 2-channel instrument,

the 2nd channel should be deactivated (see chapter 6.4.5 “Activate/

deactivate measuring channels (only for 2-channel instruments [Chnl]”.

Unit Prob Lin2 CAL Chnl ArEA Lo6

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

No comments

Wika CTH6300 User Manual Page 31