Wika CPC3000 User Manual download pdf (Page 24)

Pneumatic High-Speed Pressure Controller CPC3000

WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.124

11498171.01 08/2009 GB

7. Operation via Touch-screen

This chapter describes the procedures for operating the CPC3000 from the front panel.

Tabs, Keys, Value Entry and Check Boxes:

Local operation is accomplished by observing the data presented in the display menus,

then pressing the on-screen tab, key, value entry or check box for the desired sub-menu,

function or selection. Tabs are used to access the subset of a menu, keys open new menus,

make selections or change a parameter, value entry opens a keypad to enter a value, and

check boxes allow choice of associated display option.

Screen hierarchy:

Navigation within the CPC3000 is similar to a computer file system or a web page. Keys or

tabs activate sub-menus. Within the sub-menus there may be related sub-menus or selec-

tions. To return back through the hierarchy of screens the [BACK] key is provided.

Throughout this manual screen hierarchy will be designated using the following conven-

tion: "MAIN -> SUB-MENU -> SELECTION" or "MAIN -> SUB-MENU -> TAB -> SELEC-

TION". The hierarchical menu structure is very intuitive and will become more obvious after

reviewing following examples.

7.1 Setting the operating language

In the upper left corner of the main display is the [SETUP] key . To change the language

select the SETUP key and select the [DISPLAY] tab if not already active. In the box labelled

"VIEW" on the upper right side of the resulting "MAIN -> SETUP -> DISPLAY" screen there is

a [FLAG] key. Press the [FLAG] key and a selection of language keys will appear. Select

the desired language. Then press the [BACK] key to return to the main menu which will now

display in the selected language. Using our convention, selecting English would be described

by the following: "MAIN -> SETUP -> DISPLAY -> FLAG -> ENGLISH".

7.2 Display configuration

The CPC3000 main menu "Figure - Main Menu" shows the main screen that appears when

the unit is turned on. A point by point description of each element is shown in this figure. The

[SETUP] key opens the SETUP menu where changes can be made and information

viewed. Each sub-menu in the SETUP menu can be activated by pressing the [DISPLAY],

[CONTROL], [REMOTE], [INFO] or [SERVICE] tab. Each of these SETUP sub-menus will be

discussed in detail in chapter 7.8.

The points on the main menu that are independent of the SETUP menus are the setpoint indica-

tion, the actual pressure reading, the units of measure and the control modes (MEASURE,

CONTROL and VENT), plus the three tab menus used for selecting a setpoint.

The [PRESSURE UNIT] key indicates the currently chosen pressure unit and can be pressed to

open a menu that allows selection of English, metric, or user defined pressure units.

The CPC3000 main menu shown in "Figure - Optional Elements" shows elements that can

be displayed on the main menu and describes the three choices available for setpoint entry

(Numeric keypad, STEP and JOG). Optional elements include the Communication status icon

which indicates a connection or disconnection from a remote computer, and the barometric

reference indication showing the value of the atmospheric pressure measured by the optional

internal barometric reference sensor.



1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Comments to this Manuals

No comments

Wika CPC3000 User Manual Page 24

Comments to this Manuals

Related products and manuals for Measuring instruments Wika CPC3000