Wika DPT-10 User Manual download pdf (Page 51)

Part sum counter

0.0000 10

gal

Modify settings?

2 Activate the function "Modify settings?" with [OK].

Part sum counter

▶

Eﬀective pressure transmitter

Unit

3 Conﬁrm with [OK] "Eﬀective pressure transmitter".

Part sum counter

▶

Mass ﬂow

▶

Volume ﬂow

Without unit

4 Select the requested variable with [->] and conﬁrm with [OK].

5 Select calibration unit of the eﬀective pressure transmitter with [-

>], for example m

/s and conﬁrm w ith [OK].

Part sum counter

0 % = +0000

/s=

100 % = +0000

/s=

6 Edit with [OK] and set the requested values with [+] and [->].

7 Conﬁrm with [OK] and jump back to the indication of the part sum

counter.

8 Select with [->] the unit of the sum counter, adjust the requested

unit with [->], for example m

/s and conﬁrm with [OK].

The setting of the part sum counter is hence terminated, the counting

function is activated.

The procedure of the total sum counter is the same.

This function enables reading out parameter adjustment data as well

as writing parameter adjustment data into the sensor via the indicating

and adjustment module. A description of the function is available in the

operating instructions manual "Indicating and adjustment module".

The following data are read out or written with this function:

l Measured value presentation

l Application

l Unit of measurement

l Adjustment

l Damping

Copy sensor data

Diﬀerential pressure transmitter DPT10 - metal measuring diaphragm • Foundation Fieldbus 51

6 Adjustment with the indicating and adjustment module

37246-EN-100120

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Comments to this Manuals

No comments

Wika DPT-10 User Manual Page 51

Comments to this Manuals

Related products and manuals for Measuring instruments Wika DPT-10